Skill Level: Intermediate. Estimated Time: Depends on personal level experience, ability to work with tools and access to the light fixture s. Important: Installing additional fixture wiring should be done with a permit and be inspected. Insulation Factors and Recessed Pot Lights. The Following will assist you with your Recessed Pot Lights.
Recessed Pot Lighting. Get a Quick Reply! Ask the Electrician. Electrical Video 1 Electrical Wiring Tips? Electrical Video 1 Electrical Wiring Tips. Helping You to Wire It Right! See the Electrical Wiring Video 2 Below:. Recessed Lighting Designs and Installation Factors. The Non-Contact Electrical Tester. Simply insert the end of the tester into an outlet, lamp socket, or hold the end of the tester against the wire you wish to test.
Very handy and easy to use. The Plug-In Outlet Tester. This is great to troubleshoot a problem with outlet circuit wiring, is also used by most inspectors to test for power and check the polarity of circuit wiring. Task lighting in kitchens. Pot lights can provide directional light over countertops. Since many finished basements might have a drop ceiling or a lower ceiling, they are commonly found in basements. Shower enclosures. While these are the most popular spaces for recessed lighting, you could install pot lights in any room of the house.
You just need the light. The ability to hide a pot light right in the ceiling is the main benefit of this lighting type. They remain hidden, while performing their main function: lighting the room.
This is why many homeowners choose to install pot lights in the basement. It might stand out too much and make the space feel cramped. Recessed lights help those rooms with lower ceilings feel more open, without taking up valuable head space. Sealed recessed light fixtures are one of the only waterproof options on the market. This makes them the best and sometimes the only choice for your shower lighting.
Generally, ambient lighting comes from a central mounted light fixture. This provides illumination from the middle of the room outward.
With pot lights, you can have even ambient lighting throughout the entire space. Unlike some trendy light fixtures that can go out of style, pot lights can pass the test of time.
Pot lights provide directional lighting, which means they only light in one, very pointed area. The light shines directly below, or wherever they are pointing. That means you need lots of them to completely illuminate a room. For a large room, you might need up to 12 pot lights to cover the ceiling and provide proper lighting. Because they are directional, they can be easily shadowed. For example, someone who walks in front of your recessed task lighting in the kitchen can cast a shadow over your work area.
The lights are in the ceiling and will make holes that need to be sealed to maintain energy efficiency. There are ways to fill these gaps, but you cannot cover them with insulation. This is because the lights generate heat and if the fixture is touching insulation it could be a fire hazard.
To work around this, you can get a sealed pot light or a light that is rated properly for nearby insulation. Read more about purchasing IC rated pot lights. Note that these instructions are for installing pot lights where there were already pot light fixtures before. You can pick up a circuit tester at the hardware store to test that the power is off before you handle electrical wiring. There are typically two types of housing. Housing that can be used for new construction when you have complete access from above the ceiling and housing that can be used for renovations with limited access.
There is not much to a pot light, but you do have some options. The inner casing that covers the metal housing, to make it look more stylish, is called a baffle. Most baffles are simple, but you can choose a reflective baffle if you want to add dimension to your lighting or target a specific area with light.
The trim is what covers the rim of the housing and what touches the ceiling the line. It helps hide any rough edges that might be cut into the ceiling for installation.
Many pot light fixtures come with a combined trim and baffle. Ensuring the electricity is turned off, you can now remove the old light fixture and the junction box. You might have to use a power saw to cut the junction from the joist. Try tracing the new fixture on a piece of paper, then using that paper to trace your cut lines on the ceiling.
In some cases, the old hole will fit your new fixture. Some fixtures will also come with a traceable template for your ceiling hole. After carefully measuring, use a drywall hand saw or a hole cutter attachment on your power drill to cut the hole. Take your time to ensure a smooth cut. Older drywall might want to crumble so extra care must be taken. The light will have an attached junction box.
Open it and clamp the wires — the shut it. Now strip the plastic off the end of the wires and use wire nuts to clamp them together. Connect them black to black, white to white and bare wire to bare wire. If doing this wiring makes you feel uncomfortable, contact an electrician to do the job for you. Turn the power back on at the circuit breaker and use a voltage tester to test the fixture. Electricity should be reaching the socket.
Now that you know everything works, slide in the housing into the hole. There will be clips along the sides of the housing that you can push inward with a screwdriver. Sometimes these parts are attached to the housing. If so, attach the housing to the holes in the pot light and slide the baffle and trim upward until the entire unit is flush with the ceiling line.
0コメント